3-D Transient Heat Transfer in a simulated Solar-Heated Adsorption Panel
A Groundwater Resources Study for Santiago City Aquifer Basin
A Multi-Objective optimization Framework for Treatment Planning of permanent Prostate Branchytheraphy
A New Optimization Model for Branchytheraphy Treatment Planning
A Numerical solution to math Models on the Thermal Performance of Micro Flat Heat Pipes
A Study of the types of Learners Interaction and Characteristics affecting students satisfaction and Academic performance in Online Instruction
A proposed improvement of Solid Waste Management for the Cavite City Public Market
A study of the Design Methodologies of RF CMOS Mixers for LOWIF Receivers
Access Control for video-based Collaborative Learning Frameworks
Adsorption behavior of Phenolpthalein on Electrospun PMMA/CLAY nanostructured Fibers
Adsorption of Copper (CU2+) Ions from Aqueous solution by non-crosslinked and crosslinked Chitosan-Coated Bentonite Beads
An Analysis of the Comprehension of Pictograms used in the Globally Harmonized Systems for hazard and labeling of Chemical (GHS) and its suitability for Filipinos
An Application of Multi-objective particle swarm optimization to end-of-day Historical Stock Trading
Analysis of different AMBA-BASED bus interconnection schemes for ARM7 Multicore Environment
Application of Cationic Polymer to Dewatering of Metro Manila Septage
Application of Multiple Criteria Decision Making to Solar Energy Technologies in the Philippines
Applied GIS and Remote Sensing in Planning Routes for Irrigation Canal Systems (the Case of Matuno-Santo Domingo Communal irrigation project in Nueva Ecija, Philippines)
Assessment of Jeefney in terms of Ergonomics, safety and environmental factors for the development of specifications and standards.
Assessment of the current Transportation System management in Davao City with focus on Vehicular Flow Improvement.
Asymetric Clustering of Microarchitectures through dynamic-selective shutdown and sharing of functional units
Combining Task and Role-based Access Control with Multi-constraints for a Medical workflow System
Comparison of integrated LNA-MIXER Topologies for Wimax applications in a standard 90-NM CMOS process
Computational Fluid dynamics analysis of Savonius Wind Turbine with varying twist Angles
Consideration of Dynamic Winf effects using a modified Davenport Gust response factor formulation in the structural design and Evaluation of self-supporting Antenna Towers in the Philippines
Degradation of Reactive Blue 19 using Electrochemical Peroxidation process: Application of a 23 full factorial Design
Design and Costing of CO2 capture from the Flue Gas of a Stream Methane Reformer
Detection and Analysis of Land-Cover Change: A Case of two Mindanao Provinces with History of Forest Resource Utilization
Determination of the Physical and Mechanical Properties of Recycled low-density Polythelene and Biomass composites for use as Microbial Support Media for Biological treatment of Wastewater
Developing a Predictive Emission Model for a Diesel Fuel-fired Power Plant
Developing an Monitoring and control system Model for assessing performance of small scale gold mining production systems in the Philippines
Developing the bounded inventory level policy as an inventory control mechanism for reentrant lines
Development Of Drive Cycle and Emission Models for in-use Tricycles in Metro manila
Development of a Voice Enhancement Device for Adaptive Multi-Rate Wideband (AMR-WB) Codec
Effect of Temperature, Permanent Type and Bacterial Degradation on the Permeability of a proposed landfill liner from recycled laminated plastic materials
Effects of Acetic, proponic and Butyric Acid concentrations on Methanogenesis in Mesophillic Anaerobic Reactors
Effects of Background variation on special Vegetation indices in Mangrove Forest
Effects of Bentonite Slurry on the skin friction capacity of bored piles
Effects of Sparger pore Size and frother concentration on Bubble size and Stability
Electrochemical Migration of Silver under Temperature-Humudity-Bias-Stressing-Conditions
Equilibirum and Kinetic Studies on the Adsirption of Lead and Copper in Aqueous Solution on Coco Peat
Evaluation of Oil extraction Ultrasonification of Chlorella Vulgaris grown in Nitrogen, Phosphorus, and potassium (NPK)
Evaluation of Performance od Diesel additive from pyrolysis oil of Waste foamed Polysteryne and used Motor Oil
Extraction of B-carotene from natural substrates using supercritical Ethane and Ethylene
Formation and properties of ABA/Polyester Composite
Formulation and Assessment of SPT Hammer Energy Transfer based on Energy and Momentum Conservation
GM-C-LOW-PASS filter design for Wimax applications in a 90NM CMOS process
GPS-BASED TRAVEL TIME AND DELAY SURVEY METHODOLOGY AND TRAFFIC DATA ANALYSIS
Heat Transfer and Mass Transfer in simulated Solar-Heated Membrane Distillation
ICTIntegration Framework and Implementation Model in basic Education
Improvement of a passive RFID reader front-end Architecture
Influence of water Content, Concentration, and Nutrient addition on the Biofiltration of Toluene for air pollution Mitigation using Oil Biofilters with water content control
Inhibiton of Copper Corrosion in Domestic Water Applications
Integration of RS/GIS and Community Knowledge-based Data Analaysis for scenarion Modeling of Water Allocation Management in Downstream Angat River
Integration of Remote Sensing, GIS and hydrologic Models for predicting Land cover change impacts on watershed runoff and sediment yield
Joint source-channel coding for packet Network Transmission of low bit rate wide Band Speech
Low Cost Water Permeability Apparatus for Concrete
MMOBILIZATION OF SACCHAROMYCES ON NATA DE COCO: EFFECTS OF AGITATION RATE AND NATA DE COCO GEOMETRY
MODELING OF OVERCURRENT PROTECTIVE RELAY RESPONSE TIME TO ELECTRICAL TRANSIENTS IN POWER SYSTEMS
Mathematical Modeling of Sediment-Laden shallow water flow using finite volume method
Mondeling the depth of Chloride Ingress and time-to-initiate Rebar Corrosion in concretes exposed to Tiodal Zone
Monitoring urban Heat Island Phenomenon in Metro Manila: A Remote Sensing-GIS Approah
On the Topological properties of Generalized Hypercubes
Optimization Models for the downbinning problem in Semiconductor Manufacturing
Performance Evaluation of Aerobic moving bed biofilm, reactor and Aerobic attached film reactor using solid wastes as Microbal support for the treatment of simulated wastewater with sugar and Ammonia
Performance benchmarking of new software stream ciphers for secure Multimedia Streaming in Resource-Constrained Devices
Photovoltaic array Reconfiguration of Maximum Power Transfer
Real-time implmentation of low bit-rate wideband speech coders on ADSP-21065L
Reduction of Heavy Metal and Microbial contanimants in Septage via Vermicomposting
Remediation potential of Compost and Vermicast
Remote Sensing and GIS for Analyzing and Describing Forest cover Change in the Ancestral Domain of the AGTA in General Nakar, Quezon
Remote Sensing and geographic Information Systems in Identifying and quantifying inflow parameters for reservoir operations
Remote Sensing, Geographic Information Systems, and Shannons enthropy: Measuring and Monitoring urban Sprawl in a Mountainous Environment
Removal of Xylene and Toluene Vapors in classical Biofilter and Biotrickling Filter
Simulating Urban Expansion through Remote Sensing, Geographic Information System and Agent-based Modeling: Integrating Spatial Data and Spatial Process Model
Spectral Response Analysis of selected Philippine Agricultural Soils in varying Nutrient Conditions
Synthesis and Characteristization of a Manihot Esulenta-Based Biodegradable, Lignocellulosic Reinforced, Thermoplastic starch foam material as a Plastic Foam Substitute
System-level analog Architectural design for Wimax direct conversion receivers in 90NM CMOS
The Design and Evaluation of an ozone Contractor-reactor for color and organic matter removal in distillery wastewater
The potential of Ordinary Compost and Vermicompost bacterial Isolates in Reducing the Harmful Bloom of Microcystis Aeruginosoa
The tour construction and Improvement Method: An alternative approach to the multiple traveling salespersons problem
Ultimate Capacity of Biaxially loaded R.C. Columns of Arbitrary cross-section using parametric mapping
Use of Coconut Fiber for particle enlargement of particulate matter in Diesel Exhaust