System-level analog Architectural design for Wimax direct conversion receivers in 90NM CMOS: Difference between revisions
(New page: '''Lendl Israel M. Alunan''' (MS Graduated: 2nd Sem 2010-2011) '''Abstract''' Recent advances in wireless communication schemes have resulted in an increasing demand for small, h...) |
|
(No difference)
|
Revision as of 12:59, 7 September 2011
Lendl Israel M. Alunan
(MS Graduated: 2nd Sem 2010-2011)
Abstract
Recent advances in wireless communication schemes have resulted in an increasing demand for small, highly integrated RF transceivers that have very low power dissipation. Consequently, there has been an aggressive downscaling of RF CMOS technologies, enabling the possibility of denser integration, higher transit frequencies, and lower costs.
However, CMOS scaling has introduced new design challenges. Complex systems such as wireless receivers could no longer be analyzed simply at the circuit level. There arises a need to simulate new architectures at a higher level of abstraction so that they can be optimized and compared quantitatively in terms of performance, power and area. There exists a large dependency between system-level architectural decisions and performance metrics of each circuit block in the architecture, which is in turn dictated by the technology process being used.
In this research, the different system-level issues involved in the design of a direct-conversion receiver are investigated. The receiver is designed to target Worldwide Interoperability for Microwave Access (WiMAX) applications, which has been rapidly gaining momentum as an alternative to cable and DSL in delivering wireless broadband access to end-users.
It was found through simulations that the CMOS process introduces large values of flicker noise, which could be a barrier especially for the design of the down-conversion mixer and the other baseband blocks such as the filter and the VGA.
High-level design trade-offs in the direct-conversion receiver architecture are also investigated to characterize the effect of each block in the whole system’s performance. Based on system-level simulations, a design flow is developed that would further improve subsequent efforts to design a fully integrated wireless CMOS transceiver, in the laboratory.