A Numerical solution to math Models on the Thermal Performance of Micro Flat Heat Pipes: Difference between revisions
Mqmallonga (talk | contribs) No edit summary |
Rsmoralejo (talk | contribs) No edit summary |
||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
A Numerical solution to math Models on the Thermal Performance of Micro Flat Heat Pipes | |||
:by Emma M. Evangelista | |||
Thesis (MS Chemical Engineering) - University of the Philippines Diliman, 2007 | :Thesis (MS Chemical Engineering) - University of the Philippines Diliman, 2007 | ||
'''Abstract''' | '''Abstract''' | ||
Line 8: | Line 8: | ||
[[Category: Theses]][[Category:College of Engineering Thesis]][[Category: Chemical Engineering Thesis]] | [[Category: Theses]][[Category:College of Engineering Thesis]][[Category: Chemical Engineering Thesis]][[Category:2007 Thesis]] | ||
Subject Index : Heat Pipes | Subject Index : Heat Pipes |
Latest revision as of 14:32, 2 March 2016
A Numerical solution to math Models on the Thermal Performance of Micro Flat Heat Pipes
- by Emma M. Evangelista
- Thesis (MS Chemical Engineering) - University of the Philippines Diliman, 2007
Abstract
This study presents a computer program solution to mathematical models of micro flat heat pipes with different grooved wick geometries in predicting their thermal performance. A parallel math model is developed and solved using a numerical program. The model developed is used to thermally characterize micro flat pipes using different wick geotries such as as trapezoidal sinusoidal, rectangular grooves. Thermal characterization involves data generation on the following parameters: axial variation of liquid and vapor pressure drops which determines the necessary capillary pressure needed for continuous operation axial variation of radius of curvature of liquid-vapor interfacial meniscus which describes the continuous wetting of the wick structure and variation of maximum heat transport capability with temperature range which describes the effective cooling capacity of the flat heat pipe. Numerical computations are performed for the four wick geometries using two separate working fluids: ammonia and water. The program is validated by comparing the results obtained with existing literature values. This study is a useful tool in design applications for micro flat heat pipes utilizing different groove geometries.
Subject Index : Heat Pipes